Sl.No |
NAME |
DESCRIPTION |
1. |
Flat Meters |
For checking width of the Races |
2. |
Dial Comparators |
1.For checking Bore Dia (equiped with 0.001mm L.C.)
2.For checking Track Dia (equiped with 0.001mm L.C.)
3. For checking Outer Dia (equiped with 0.001mm L.C.)
4. For checking three(equiped with 0.001mm L.C.)
points error
5. For checking Squareness (equiped with 0.001mm L.C.) |
6.For checking Track Center Variation |
3. |
Computerised Surface Finish Testing Machine
(Make -Mitutoyo ) |
For checking surface roughness of ground and honned surface of Ball Bearing Races, Steel balls and Rollers. |
4. |
Hardness Tester |
For checking Inner & Outer Races Steel Balls hardness |
5. |
Slackness Testing |
For checking Radial Clearance of assembled bearings |
6. |
Air Bore Gauge
(Make – Baker) |
For checking Bore of Inner Races with Plug Gauge & Setting Rings size – 10mm, 12mm, 15mm, 17mm, 20mm, 25mm, 30mm, 40mm, 45mm, 50mm , 55mm , 60mm, 65mm, 70mm, 75mm & 80mm (0.001mm L.C.) |
7. |
Slip Gauge |
For Work Shop Grade- II |
For Caliberation (Tungsten Carbite) Grade –0 |
8. |
Curvature Disks |
For checking curvature of Races |
9. |
Height Gauge (Mitutoyo) |
For checking height of any part |
10. |
Bevel/Angle Protractor (Mitutoyo) |
For checking Angels of any part |
11. |
Micrometers (Outside) |
For Cheking of Diameters (Mitutoyo make) |
0 – 25 mm; (Least count 0.01mm) |
25 – 50 mm (Least count 0.01mm) |
50 – 75 mm (Least count 0.01mm) |
75 – 100 mm (Least count 0.01mm) |
100 – 150 mm (Least count 0.01mm) |
12. |
Micrometers (Inside) |
For checking Inside Diameters of any part (Mitutoyo make) |
5 – 30 mm (Least count 0.01mm) |
30-50 mm (Least count 0.01mm) |
50-75 mm (Least count 0.01mm) |
13. |
Digital Vernier |
For checking sizes of Races/Parts (Mitutoyo make) 6” |
14. |
Vernier Caliper |
For checking sizes of Races/Parts (Mitutoyo make) 12” |
15. |
Thickness Gauge |
For checking gape between two parts |
16. |
Thread Gauge |
For checking threads of any Screw |
17. |
Center Table |
For concentricity of Shafts |
18. |
Surface Plate |
For scraping or using it as master plate |
19. |
Noise Testing Equip. |
For checking noise of Bearings |
20. |
Profile Projector |
For checking profile of Bearings up to 50 times (50 x) magnifications |
21. |
Metallurgical Microscope |
For checking Micro Structure of Hardened Races |
22. |
Load Testing Machine |
For checking life of Bearing on certain load and RPM |
23. |
Crack Detector |
Checking of crack in soft and hard races of bearings. |
24. |
Computersied Roundness Tester (Mituytoyo) |
Checks roundness of bearing races |
25. |
Microscope |
For checking metallurgical structure |
26. |
Magnifier Lights |
For Visual Inspection |
|
|
|